Did you find this document helpful?
Yes
No  

ATXn result code set options

Result codes set option. If you set X to a number listed at the top of this table, you get the messages, or result codes, marked with a plus sign "+" under that number.

Message 0 1 2 3 4
0 / OK + + + + +
1 / CONNECT + + + + +
2 / RING + + + + +
3 / NO CARRIER + + + + +
4 / ERROR + + + + +
5 / CONNECT 1200   + + + +
6 / NO DIAL TONE     +   +
7 / BUSY       + +
8 / NO ANSWER       + +
10 / CONNECT 2400   + + + +
13 / CONNECT 9600   + + + +
18 / CONNECT 4800   + + + +
20 / CONNECT 7200   + + + +
21 / CONNECT 12000   + + + +
25 / CONNECT 13800   + + + +
43 / CONNECT 16800   + + + +
85 / CONNECT 19200   + + + +
91 / CONNECT 21600   + + + +
99 / CONNECT 24000   + + + +
103 / CONNECT 26400   + + + +
107 / CONNECT 28800   + + + +
Adaptive Dialing     + + +
Wait for 2nd Dial Tone (W)       + +
Wait for Answer (@)       + +
Fast Dial     +   +

Use AT&A0 or AT&A1 to disable / enable the following ARQ result codes. Default is AT&A1 (ARQ codes enabled).

14 / CONNECT / ARQ (only when modem is set to X0)
15 / CONNECT 1200 / ARQ
16 / CONNECT 2400 / ARQ
17 / CONNECT 9600 / ARQ
19 / CONNECT 4800 / ARQ
22 / CONNECT 9600 / ARQ
24 / CONNECT 7200 / ARQ
26 / CONNECT 13800 / ARQ
57 / CONNECT 16800 / ARQ
88 / CONNECT 19200 / ARQ
94 / CONNECT 21600 / ARQ
100 / CONNECT 24000 / ARQ
104 / CONNECT 26400 / ARQ
108 / CONNECT 28800 / ARQ

Use AT&A2 and ATX1 or higher to add V.32 modulation indicators, as well as ARQ and non-ARQ status, to result codes.

33 / CONNECT 9600 / V32 120 / CONNECT 2400 / V34
37 / CONNECT 9600 / ARQ / V32 124 / CONNECT 4800 / V34
38 / CONNECT 4800 / V32 128 / CONNECT 7200 / V34
39 / CONNECT 4800 / ARQ / V32 132 / CONNECT 9600 / V34
40 / CONNECT 7200 / V32 136 / CONNECT 12000 / V34
41 / CONNECT 12000 / V32
42 / CONNECT 12000 / ARQ / V32
44 / CONNECT 7200 / ARQ / V32
45 / CONNECT 13800 / V32
46 / CONNECT 13800 / ARQ / V32
37 / CONNECT 9600 / ARQ / V32
39 / CONNECT 4800 / ARQ / V32
44 / CONNECT 7200 / ARQ / V32
42 / CONNECT 12000 / ARQ / V32
46 / CONNECT 13800 / ARQ / V32
93 / CONNECT 21600 / V32
97 / CONNECT 21600 / VFC
101 / CONNECT 24000 / VFC
105 / CONNECT 26400 / VFC
109 / CONNECT 28800 / VFC
139 / CONNECT 13800 / VFC
143 / CONNECT 16800 / VFC
147 / CONNECT 19200 / VFC
111 / CONNECT 21600 / V34
113 / CONNECT 24000 / V34
115 / CONNECT 26400 / V34
117 / CONNECT 28800 / V34
140 / CONNECT 13800 / V34
144 / CONNECT 16800 / V34
148 / CONNECT 19200 / V34
96 / CONNECT 21600 / ARQ / V32
98 / CONNECT 21600 / ARQ / VFC
102 / CONNECT 24000 / ARQ / VFC
106 / CONNECT 26400 / ARQ / VFC
110 / CONNECT 28800 / ARQ / VFC
141 / CONNECT 13800 / ARQ / VFC
145 / CONNECT 16800 / ARQ / VFC
149 / CONNECT 19200 / ARQ / VFC
112 / CONNECT 21600 / ARQ / V34
114 / CONNECT 24000 / ARQ / V34
116 / CONNECT 26400 / ARQ / V34
118 / CONNECT 28800 / ARQ / V34
122 / CONNECT 2400 / ARQ / V34
126 / CONNECT 4800 / ARQ / V34
130 / CONNECT 7200 / ARQ / V34
134 / CONNECT 9600 / ARQ / V34
138 / CONNECT 12000 / ARQ / V34
142 / CONNECT 13800 / ARQ / V34
146 / CONNECT 16800 / ARQ / V34
150 / CONNECT 19200 / ARQ /V34

Use AT&A3 and ATX1 or higher to add error-control protocol indicators (LAPM, MNP, or NONE) and data-compression type (V.42 bis or MNP5).


   
Copyright © 1997, 1998, 1999, 2000 Gateway, Inc. All rights reserved.
Please see our Legal Information, Privacy Statement, Terms and Conditions of Sale and Limited Warranty. Send feedback to Webmaster Central. Linking and Logo Information.