Seagate SCSI Settings
 ID 1 |
 ID 2 |
 ID 3 |
 ID 4 |
 ID 5 |
 ID 6 |
 ID 7 |
 ID 8 |
 ID 9 |
 ID 10 |
 ID 11 |
 ID 12 |
 ID 13 |
 ID 14 |
 ID 15 |
| SCSI ID (address) pins |
| DSA3 |
DSA2 |
DSA1 |
DSA0 |
Device ID |
| (01) |
(02) |
(03) |
(04) |
| OFF |
OFF |
OFF |
OFF |
0 |
| OFF |
OFF |
OFF |
ON |
1 |
| OFF |
OFF |
ON |
OFF |
2 |
| OFF |
OFF |
ON |
ON |
3 |
| OFF |
ON |
OFF |
OFF |
4 |
| OFF |
ON |
OFF |
ON |
5 |
| OFF |
ON |
ON |
OFF |
6 |
| OFF |
ON |
ON |
ON |
7 |
| ON |
OFF |
OFF |
OFF |
8 |
| ON |
OFF |
OFF |
ON |
9 |
| ON |
OFF |
ON |
OFF |
10 |
| ON |
OFF |
ON |
ON |
11 |
| ON |
ON |
OFF |
OFF |
12 |
| ON |
ON |
OFF |
ON |
13 |
| ON |
ON |
ON |
OFF |
14 |
| ON |
ON |
ON |
ON |
15 |
Note: In the address determination table, 'OFF' means jumper is not in place and 'ON' means jumper is in place.
Do you have questions, comments or suggestions regarding the format of this page? If so, drop a line to the Internet Editors . Any feedback would be MUCH appreciated!
Please note: If you have questions of a TECHNICAL nature or need TECHNICAL assistance, please contact technical support here as the Internet Editor address does not reach a Gateway support technician. Questions of a technical nature or requesting technical assistance cannot be responded to via the Internet Editor address.
|
