Optima Series with Intel Pentium ® MMX" processor
Return to Notices/Addendums
The illustration below reflects the new System Board and Jumper Settings for the Optima DT and MT 166 or 200-MHz and Optima SL 166-MHz systems. The Optima series systems will now support MMX" technology. This addendum also includes information regarding FCC classification.
The Pentium processor with MMX" technology, the highest performing Pentium processor, enhances performance of multimedia applications and offers new features and capabilities. These high speed Pentium processors have immediate responsiveness for the latest, most demanding software with powerful realistic graphics and the ability to run full-screen, full-motion video. This technology is fully compatible with the huge base of existing software and operating systems.
System Board
Jumper Settings
FCC Notice (Class B)
The following ALR System models have been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules: ALR MT (166-MHz) ALR MT (200-MHz)
These limits are designed to provide reasonable protection against harmful interference in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the manufacturer's instructions, may cause interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the problem by performing one or more of the following measures:
- Reorient or relocate the receiving antenna.
- >Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the reseller or an experienced radio-TV technician for help.
- Use shielded I/O cables when operating this equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device must not cause harmful interference. This device must accept interference which may cause undesired operation.
To ensure this product does not contribute to interference, use shielded and properly grounded I/O cables. Do not make any changes or modifications not expressly approved by the manufacturer, or the warranty could be voided.
ALR is not responsible for any radio or television interference caused by unauthorized modification of this equipment or the substitution or attachment of connecting cable and equipment other than those specified by ALR. The correction of interference caused by such unauthorized modification, substitution, or attachment will be the responsibility of the user.
Canadian Department of Communications Compliance Statement:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the radio interference regulations of the Canadian Department of Communications. Operation of the equipment in a residential area is likely to cause harmful interference in which the user will be required to correct the interference at his own expense.
Avis de Conformite aux Normes du Ministere des Communications du Canada:
Cet équipment ne dépasse pas les limites de Classe B d'émission de bruits radioelectriques pour les appareils numériques telles que perscrites par le Réglement sur le brouillage radioelectrique établi par le ministére des Communications du Canada. L'exploitation faite en milieu résidential peut entrainer le brouillage des receptions radio et télévision, ce qui obligerait le propriétaire ou l'opérateur à prendre les dispositions nécessaires pour eliminer les causes.
Bescheinigung des Herstellers/Importeurs
Hiermit wird bescheinigt, daß das in Übereinstimmung mit den Bestimmungen der Vfg 1046/1984 funkentstört ist. Der Deutschen Bundespost wurde das Inverkehrbringen dieses Gerätes angezeigt und die Berechtigung zur Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt.
Declaration of Conformity
This is to certify that the following ALR System models have been designed and manufactured in accordance with the protection requirements of the EMC Directive 89/336/EEC Council Directive relating to electromagnetic compatibility:
ALR MT (166-MHz)
ALR MT (200-MHz)
In accordance with the aforementioned directive, this device conforms to the following harmonized standards:
Safety |
EN 60950: 1988+ A1, A2 |
EMC |
EN 55022 |
(Class B) Limits and methods of measuring of radio interference characteristics of information technology equipment |
|
EN 50082-1 |
Electromagnetic compatibility generic immunity standard Part 1: residential, commercial, and light industry |
NOTE: The list of available Optima Series System models is subject to change, based on the current technology. For an updated listing of ALR systems and their corresponding FCC and CE ratings, refer to ALR's World Wide Web site at http://www.alr.com/.
Document 65570010
|